Series-1 (May-June 2019)May-June 2019 Issue Statistics
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | Impact of Beater Speed of Coarse Cleaner on the Quality Parameters of Blow room by Using Regression Analysis |
| Country | : | Bangladesh |
| Authors | : | Md. Rashel Hawlader || Sraboni Ahmed || Faisal Rahman || Lutfor Rahman Shanzid || TanzeenaRefat Tumpa |
 |
: | 10.9790/019X-06030106  |
Abstract: An effective cotton spinning requires efficient opening & cleaning of raw material. The beating point of coarse cleaning machine (Uniclean) influences neps generation, fiber length and short fiber content. By keeping this view, to change various setting, Cleaning Intensity (C.I) and Relative Amount of Waste (RAW) of cleaning machine which affects fiber rupture, cleaning efficiency, good fiber loss percentage in waste. The effect of beater speed of coarse cleaner was studied for quality characteristics of cotton. The results in respect of neps generation, fiber length and short fiber content showed highly significant differences in the mean values for different combination of settings as well as cleaning segments
[1]. Ishtiaque, S. M., Chaudhuri, S., & Das, A. (2003). Influence of fibre openness on processibility of cotton and yarn quality: Part IEffect
of blow room parameters
[2]. Pujara, M. H. (2016). Effect of Cotton Fibers and Their Trash Characteristics on the Performance of Spinning Preparatory
Processes. International Journal of Engineering Research and Applications, 6(6), 42-45
[3]. Ratnam, T.V. and Chellamani, P., Norms for Spinning, 5th Edition, SITRA, Coimbatore, India, pp 1-9 & 30 -37, 2000
[4]. Chaouch, Walid & Hassen, Mohamed &Faouzi, Sakli. (2007). Evaluation of cleaning efficiency in blowroom& carding. The Indian Textile Journal. 54
[5]. Khan, A.N. (2009) Principles of Short Staple Spinning
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | Neutrosophic Feebly Connectedness and Compactness |
| Country | : | |
| Authors | : | Dr.K.Bageerathi || P. Jeya Puvaneswari |
|
: | 10.9790/019X-06030713 |
Abstract: The aim of this paper is to construct the concepts related to connectedness in neutrosophic topological spaces. Here we introduce the concepts of neutrosophic feebly connected, neutrosophic feebly disconnected, neutrosophic feebly..........
Key-words: and Phrases: Neutrosophic topology, Neutrosophic feebly connected, Neutrosophic feebly disconnected, Neutrosophic feebly 𝐶𝑖-
[1]. Albowi, SA, Salama, A, and Mohamed Eisa, 2013, New Concepts of Neutrosophic Sets, International Journal of Mathematics and Computer Applications Research, Vol.3(3), pp. 95-102.
[2]. Atanassov, K, 1986, Intuitionistic Fuzzy Sets, Fuzzy Sets and Systems, 20, pp. 87-96.
[3]. Chang, CL, 1968, Fuzzy Topological Spaces, J. Math. Anal. Appl. 24, pp.182-190.
[4]. Dogan Coker, 1997, An Introduction to Intuitionistic Fuzzy Topological Spaces, Fuzzy Sets and Systems, 88, pp. 81-89.
[5]. FloretinSmaradache, 2010, Neutrosophic Set:-A Generalization of Intuitionistic Fuzzy Set, Journal of Defense Resources Management. 1, pp. 107-116
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | The Optical and Thermal Properties of PLA Filament in a Context of Material Colour and 3D Printing Temperature |
| Country | : | POLAND |
| Authors | : | Filip Mikołajczyk || Sławomir Kuberski |
|
: | 10.9790/019X-06031422 |
Abstract: A detailed analysis of the influence of PLA filament colour on thermal and optical properties of the 3D print was performed. Additionally, the correlation between the temperature of the nozzle of the 3D printer and quality of the printed model was investigated. To add more, a comparison between thermal properties of material exposed to different UV lights and a sample not exposed to such light was performed. The spectrophotometry was used for an analysis of optical properties, such as absorbance, of the samples printed from PLA of different colours. The DSC analysis was used for measuring the thermal properties of the analysed samples. It was determined that......
Key-words: 3D printing, DSC analysis, spectrophotometry, PLA filament
[1]. E. G. Gordeev, A. S. Galushko and V. P. Anakinov;Improvement of quality of 3D printed objects by elimination of microscopic structural defects in fused deposition modelling, PLoS One, 2018, 13 (6)
[2]. A. Jennings; 3D printing troubleshooting. 41 common problems in 2019 [online], All3D, Retrieved from https://all3dp.com/1/common-3d-printing-problems-troubleshooting-3d-printer-issues/
[3]. B. Coppola, N. Cappertti, L. Di Maio, P. Scarfato and L. Incarnato;3D Printing of PLA/clay Nanocomposites: Influence of Printing Temperature on Printed Samples Properties, Materials (Basel), 2018, 11(10)
[4]. D. Farbman, C. D. McCoy;Materials Testing of 3D Printed ABS and PLA Samples to Guide Mechanical Design, In Proceedings of the ASME 2016 11th International Manufacturing Science and Engineering Conference, Blacksburg, VA, USA, 27 June–1 July 2016; p. V002T01A015.
[5]. J. Slapnik, R. Bobovnik, M. Mesl, S. Bolka;Modified polyactide filaments for 3D printing with improved mechanical properties, Contemporary Materials, 2016, VII-2, p. 142-150
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | Salt Free Reactive Dyeing On Cotton (Cationized) Knit Fabric |
| Country | : | India |
| Authors | : | SayedShokoth Hossain Baten || Taoyu yang || Minghua Wu |
|
: | 10.9790/019X-06032332 |
Abstract: Dyeing of cellulose substances with reactive and direct dyes is commercially very famous, but isn't always eco-friendly. Then again, pigment hues cannot be carried out with the aid of conventional exhaust methods. Those troubles may be solved or minimized by means of growing the affinity of cellulose materials. Cat ionization of cellulose fibers improves affinity closer to anionic dyes like reactive dyes, direct dyes, and pigment shades dispersed with anionic dispersal. Cellulose fabrics dyed with reactive dyes require a large amount of salt, which pollutes clean watercourses. Because of the hydrolysis of the dye, the dyeing effluent consists of a large amount of hydrolyzed.........
Key-words:Salt Free Dyeing, Reactive Dye, Methylamine, Cellulose, Amide Groups
[1]. I D Rattee: Reactive dyes for cellulose, Coloration 14 (1984) 1953- 1983.
[2]. C Allegre: Treatment and reuse of reactive dyeing effluents, Journal of Membrane Science 269 (2006) 15–34.
[3]. Philippe Moulin: Savings and re-use of salts and water present in dye house effluents, Desalination 162 (2004)13-22.
[4]. J A Taylor: Recent developments in reactive dyes, Coloration 30 (2000) 93-107.
[5]. A H M Renfrew: Cellulose reactive dyes: recent developments and trends, Coloration 20 (1990) 1-10.
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | Development of the Property of Fly-Ash Filled HDPE Composites -Review |
| Country | : | India |
| Authors | : | Asst. Prof. Sooraj K. Pillai || Ms.Harshita Kumari || Mr.Ashish Ranjan || Mr.Aman Kumar || Mr.Halbhavi Chirag |
|
: | 10.9790/019X-06033337 |
Abstract: Fly-ash is fine particles that are extracted from the burning of coal in electric generation power plant in thousands of tons each year. The HDPE material is compounded with different concentration of Fly-ash to form composite material. The TSE (Twin Screw extruder) is used for compounding the material and the test specimen is prepared by injection molding machine to study the physical and other properties. Mechanical property (such as, tensile strength, flexural strength, impact strength, hardness), Electrical property (such as, di-electric strength ,volume & surface resistivity) & Rheological property (such as, melt flow index) is discussed. These results are investigated with different composition of Fly-ash filled with HDPE and other plastics materials. The variation in the physical and other properties is observed.
Key-words: Fly-ash, HDPE, Composites, Mechanical Property, MFI, Electrical Property
[1]. Iftekhar Ahmad and Prakash A. Mahanwar, ―Mechanical Properties of Fly Ash Filled High Density Polyyleethne of ‖, Journal Minerals & Materials Characterization & Engineering, Vol. 9, No.3, pp.183-198, 2010jmmce.org Printed in the USA. All rights reserved
[2]. Ikhlas Kitta, Salama Manjang, Wihardi Tjaronge, Rita Irmawaty, ―Effect Of Fly Ash Filler To Dielectric Properties Of The Insulator Material Of Silicone Rubber And Epoxy Resin‖, INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH VOLUME 5, ISSUE 03, MARCH 2016 ISSN 2277-8616
[3]. RSN Sahai, and Neha Pawar , ―Studies on Mechanical Properties of Fly Ash Filled PPO Composite with Coupling Agent‖, International Journal of Chemical, Environmental & Biological Sciences (IJCEBS) Volume 2, Issue 4 (2014) ISSN 2320–4087 (Online)
[4]. Samson Oluropo Adeosun, Mohammed Awwalu Usman, Emmanuel Isaac Akpan,Winifred Ifeoma Dibie, ―Characterization of LDPE Reinforced with Calcium Carbonate—Fly Ash Hybrid Filler", Journal of Minerals and Materials Characterization and Engineering, 2014, 2, 334-345 Published Online July 2014 in SciRes.http://www.scirp.org/journal/jmmcehttp://dx.doi.org/10.4236/jmmce.2014.24038
[5]. Dr. R.S.N. Sahai, and Dr. P.A. Mahanwar, ―Effect of Particle Size and Concentration of Fly Ash on Mechanical Properties of Polyphenylene Oxide Composites‖, International Journal of Chemical, Environmental & Biological Sciences (IJCEBS) Volume 3, Issue 2 (2015) ISSN 2320–4087 (Online).
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | Model for Performance Management System of Corporate Organizations in Nigeria |
| Country | : | Nigeria |
| Authors | : | Bello Musa Ibrahim || Benson Yusuf Baha || Hamman Ibrahim |
|
: | 10.9790/019X-06033846 |
Abstract: The individual performance is critical to the execution of institutional strategy and the achievement of strategic objectives of organizations. Institutions tend to put more focus on the formulation of strategies rather than on the strategy implementation, which requires good performance by all employees in the institution. Commercial off-the-shelf (COTS) Performance Management Systems (PMSs) are too generic, which have several challenges, and have resulted to concerns regarding being effective and objective by employees of some organizations. This study developed a Task-based PMS model to address the gaps identified in the current PMSs. This was achieved by review.........
Key-words:framework, model, management, measurement, performance, appraisal
[1]. Aguinis, H. 2009 Performance Management. 2nd ed. Pearson Education, Upper Saddle River.
[2]. Amos, T.L.; Ristow, A.; Ristow, L. & Pearse, N.J (2008). Human Resource Management.3rd Edition. Cape Town: Juta & Co Ltd.
[3]. Armstrong, M. and Baron, A. (2005) Managing performance: Performance Management in Action. London: CIPD
[4]. Bitici, U. M., Turner, T. and Begemann, C. (2000). "Dynamics of performance measurement systems." International journal of
operations & production management 20: 692-704.
[5]. Daley, D. M. (2002). Strategic human resource management: People and performance management in the public sector. Prentice
Hall.
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | Wifi-Direct Ad Hoc Network for Preventing Road Accidents |
| Country | : | Bangladesh |
| Authors | : | Md. Haidar Ali || Mohammad Zonaid Bin Ferdous |
|
: | 10.9790/019X-06034750 |
Abstract: Mobile Ad hoc networks have been used in various applications. Its attractive features are its decentralized nature and less infrastructure need. Wifi-direct can be used in mobile adhoc network which is a Wi-Fi standard enabling devices to easily connect with each other without requiring a wireless access point.[1]
Assurance of road safety using new technology of Ad hoc mobile network is a developing research topic all over the world. In this paper, Wifi-direct Ad hoc network is used to ensure road safety .One key feature of Wi-Fi Direct is the ability to connect devices even if they are from separate manufacturers. Only one of the Wi-Fi devices needs to be compliant.......
[1]. "Wi-Fi Direct | Wi-Fi Alliance". Wi-fi.org. Retrieved 2013-07-30.
[2]. "Wi-Fi Direct | Wi-Fi Alliance". Wi-fi.org. Retrieved 2013-07-30.
[3]. https://en.wikipedia.org/wiki/Engine_control_unit
[4]. Poole, Ian. "Free Space Path Loss: Details, Formula, Calculator". radio-electronics.com. Adrio Communications Ltd. Retrieved 17 July 2017.
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | To Study the Factors Responsible for Learning Management System acceptability in Private Teaching Institutes in India |
| Country | : | India |
| Authors | : | Mahesh R Shetty |
|
: | 10.9790/019X-06035155 |
Abstract: Indian private teaching institutes are growing by leaps and bounds. The coaching industry has shown tremendous growth in Medical, Engineering and Specialized courses. Another phenomenon which is now a big point of attraction is introduction of Learning Management Institutes in India. Till now face to face teaching was the only method adopted into private tuition industry, but after the initiative taken by coaching institutes likes MT Educare's ROBOMATE and ALLEN's E learning program and other players in the industry, the LMS has grown into its status because of managing the entire ecosystem in such an effective way that it has become an integral part of the teaching pedagogy........
Key Words: Indian Private Tuition industry, Learning Management System, Innovation
[1]. Admiraal, W. & Wubbels T. (2005). Multiple voices, multiple realities, what truth? Student teachers' learning to reflect in different paradigms. Teachers and Teaching: theory and practice,11(3), 315–329.DOI: 10.1080/13450600500105668
[2]. Aubrey, C. (2000). Early Childhood Educational Research: Issues in Methodology & Ethics. Florence, KY. USA. Taylor & Francis Incorportated.
[3]. Avgeriou, P.; Papasalouros, A.; Retalis, S and Skordalakis, M. (2003).Towards a pattern language for learning Management Systems. Educational Technology & Society, 6(2), 11-24.
[4]. Bailey, G.D. (1993). Wanted: A roadmap for understanding integratedlearning systems. In G.D. Bailey (Ed.), Computer-based integrated learning systems. Englewood cliffs, NJ: Educational Technology Publications.
[5]. Balanskat, A., Blamire, R., & Kefala, S. (2006). The ICT Impact Report: A review of studies of ICT impact on schools in Europe. Reproduction. European Commission, European Schoolnet. Retrieved on18.09.2011 from http://ec.europa.eu/education/pdf/doc254_en.pdf.
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | Changing Paradigm in Private Tution Industry and Technology Influences on Course Delivery in India |
| Country | : | India |
| Authors | : | Mahesh R Shetty |
|
: | 10.9790/019X-06035660 |
Abstract: Indian private tuition industry is a going through a disruptive mode, where this industry has moving from one-way delivery to two-way delivery model and technology is the biggest driver to cause this disruption. Instructors role has been changing from delivery to maintaining the entire delivery to tracking the development of the students as well as continuous feedbacks from them demands them to updates them frequently. Online screening and easy accessibility of vast question banks helps to build a strong record management for the students as well as for the instructors to monitor the growth individually........
Key words: Technology influences, Private Tuition Industryand Course delivery
[1]. Alberta Education. (2006). One-to-One Mobile Computing: Literature Review. Retrieved from http://education.alberta.ca/media/528965/litreview.pdf.
[2]. Angrist, J., & Lavy, V. (2002). New Evidence on Classroom Computers and Pupil Learning. The EconomicJournal, 112 (October), 735-765.
[3]. Apple Computer. (1995). Changing the Conversation About Teaching, Learning, and Technology: A Report on 10 Years of ACOT Research. Retrieved from http://images.apple.com/education/k12/leadership/acot/pdf/10yr.pdf.
[4]. Apple Computer. (2005). Research: What It Says About 1 to 1 Learning.
[5]. Business world 2016
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | Indo-Nigeria Relations: Prospects and Challenges |
| Country | : | Nigeria |
| Authors | : | Dr. John Danfulani || Dr.Gloria Samdi Puldo |
|
: | 10.9790/019X-06036166 |
Abstract: India and Nigeria had a common history of British imperial conquest and domination, despite coming from different continents. India pulled down the Union Jack on 15th August 1947 after a protracted struggle with British imperialists. And Nigeria gained self-rule on 1st October 1960 through dialogue and many constitutional conferences. At the height of the Cold War India and Nigeria belong to the Non Alliance club of State as well as an association of British and her former colonial territories called Commonwealth. The two states officially tied the diplomatic knot in 1958 which gave rise to a series of multifaceted intercourse. Nigeria-India relations have been cordial and characterised by cooperation at international fora and at bi-lateral levels. Indian Direct Foreign Investment in Nigeria runs billions......
[1]. Kura ,S.B.(2009) Nigeria-India economic ,political,and socio-cultural relations:critical reflections for continues mutual cooperation. International Journal of African political studies, vol.5.Issue 1,PP.1-31
[2]. Eneche,G.Okpara.(2015) India-Nigeria Relations (From historical friends to strategic partners). International journal of political science and Development vol 3.number 5,2015
[3]. Parvathi V.(2010) The changing nature of Nigeria -India relations. Chatham House December 2010
[4]. Mary,I.O.N.(2014) The challenges of the Nigerian Copyright Commission(NCC) in the fight against copyright piracy in Nigeria. Global journal of politics and law research vol.2,no5,pp.22-34,December 2014
[5]. Habeeb,A.S.(2018) Corruption in the Nigeria judicial system:An overview. Journal of Financial crime vol,25 issue 3,pp.669-680