Volume-2 (1st National Conference On Recent Innovations in Mechanical Engineering (NCRIME-2018))
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | Review On Adsorption Refrigeration System |
| Country | : | India |
| Authors | : | B. K. Manmode || B.B. Aher |
Abstract: "Energy can neither be created nor be destroyed"- first law of thermodynamics. the energy potential of the world is constant , so we have to save the energy as much as possible .as the refrigeration is needed everywhere in the world and it is the major user of energy. The energy that could be used for the adsorption refrigeration is powered by low grade heat. the low grade heat can be obtain from industrial waste heat, exhaust gases from the engines or heat from solar thermal collector. Moreover it uses environment kindly refrigerants and avoids the global warming and ozone depletion.
Keywords - Adsorption, adsorption system working pairs, waste heat.
[1]. R.Z. wang, R.G. Oliveira, adsorption refrigeration-an efficient way to make good use of waste heat and solar energy, progress in
energy and combustion science 32(2006) pp 424-458.
[2]. L.W.Wang , R.Z. Wang, R.G.Oliveira, A review on adsorption working pairs for refrigeration, renewable and sustainable energy
reviews 13(2009) pp 518-534.
[3]. LI Yong and Ruzhu Z. Wang, adsorption refrigeration:A survey of novel technologies.
[4]. Ahmed Rezk Masoud Rezk, theoretical and experimentalinvestigation of silica gel / water Adsorption refrigeration systems,
University of Birmingham Research Archive.(2012) pp 9-217.
[5]. K. Sumathy, K.H.Yeung, Li Yong, Technology development in the solar adsorption refrigeration systems, Progress in Energy and
Combustion Science 29 (2003) pp 301–327.
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | A Review On Power Generation Methods Using Concentrating Solar Power |
| Country | : | India |
| Authors | : | o. M. Kshirsagar || p. V. Puri || s. S. Kale || y. S. Khairnar |
Abstract: Concentrating solar power (CSP) is a renewable generation technology that uses mirrors or lenses
to concentrate the sun's rays to heat a fluid, e.g., water, which produces steam to drive turbines. CSP differs
from solar photovoltaic (PV) technology, which directly converts the sun's ultraviolet radiation to electricity
using semiconductors. The CSP technologies discussed here are utility scale.
Because no input fuel is required, CSP plants release little or no carbon dioxide equivalent (CO2e) emissions.
CSP is a proven technology with more than 350 megawatts (MW) of installed capacity operating commercially
in the Mojave desert since the 1980s and several smaller new plants brought on line since 2006. The current
worldwide installed capacity is more than 500 MW, relying mostly on the established line-focusing parabolic
trough technology that provides peak demand generation..........
KEYWORDS - Concentrating solar power, renewable, power.
dynamic assessment of technology development, cost development and life cycle inventories until 2050'.
[2]. Soteris A. Kalogirou, ‗Solar thermal collectors and applications': Progress in Energy and Combustion Science 30 (2004) 231–295.
[3]. ‗Middle East and North Africa Region Assessment of the Local Manufacturing Potential for Concentrated Solar Power (CSP)
Projects', World Bank Report, 2011.
[4]. Hans Müller-Steinhagen, Freng and Franz Trieb, ‗Concentrating Solar Power', Institute Of Technical Thermodynamics, German
Aerospace Centre, Stuttgart, Germany.
[5]. ‗Technology Roadmap Concentrating Solar Power', International Energy Agency Report, 2010.
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | Process Failure Mode Effect Analysis of Cutting Operation of Needle for Roller Bearing |
| Country | : | India |
| Authors | : | Gajanan S. Sawadadkar || Pavan V. Puri |
Abstract: In this Paper, the needle cutting process is considered the mapping process customer requirements and product functions. Customer requirements are considered as the input information indicating the needs of customers, and they are usually obtained and organized in a marketing department through the market research activity. Failure modes and effects analysis (FMEA) is a process improvement tool to analyze and control the potential impacts from failures. Through the practice of FMEA, it is expected to anticipate the possible failures from a product or system after it is actually implemented. In such a way, engineers can improve the process by deliberately controlling the causes of failures or limiting their negative effects
Keywords - PFMEA Process Failure Mode Effect Analysis, RPN Risk priority number, S- severity, OOccurrence, D- Detection
[1]. Dale B.G, 1999. Managing Quality, 3rd edition Oxford: Blackwell Publishing.
[2]. Melan E.H, 1995. Process Management-A system Approach to Total Quality" Portland, Oregon: Productivity Press.
[3]. Pande S.,.Neuman,R.P. and Cavangh R.R, 2000. The Six Sigma Way-Hoe GE,Motorola and other top companies are
honing their performance New York, N Y:McGraw-Hill.
[4]. Pyzdek T., The Six Sigma, 2003. Handbook New York,NY: McGraw-Hill.
[5]. Florina–Cristina Filip,Department of Economic Engineering andProductionSystems,University of Brasov, 2002.
Theoretical Research on the Failure Mode and Effects Analysis (FMEA) Method and Structure.
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | Selection of Air Filter for Automobile Engines |
| Country | : | India |
| Authors | : | Prof.V.D.Karande || Prof.S.S.Dharmarao |
Abstract: This paper concentrates idea about importance of air filter in automobile engines, it's influence on engine performance. Paper also deals with general guidelines and procedure for selection of air filter in automobile. Air filter can be defined as fibrous material device used to remove unwanted subtended particles from air like dirt, dust, pollen & many other undesired things. Many times, it may contain chemical agents like Absorbent or catalysts to improve air quality eliminate odors and active gaseous.
Keywords – Air filter, Engine, Contamination
[1]. N. Shariatzadeh, T. Lundholm, L. Lindberg, G. Sivard, Integration of digital factory with smart factory based on Internet of Things,
Procedia CIRP, 50 (2016) 512-517.
[2]. R. Y. Zhong, Q. Dai, T. Qu, G. Hu, G. Q. Huang, RFID-enabled real-time manufacturing execution system for mass-customization
production, Robotics and Computer-Integrated Manufacturing, 29 (2013) 283-292.
[3]. X. Xu, From cloud computing to cloud manufacturing, Robotics and computer-integrated manufacturing, 28 (2012) 75-86.
[4]. L. Ren, L. Zhang, L. H. Wang, F. Tao, X. D. Chai, Cloud manufacturing: key characteristics and applications, International Journal
of Computer Integrated Manufacturing, (2014) 1-15.
[5]. L. Ren, L. Zhang, F. Tao, C. Zhao, X. Chai, X. Zhao, Cloud manufacturing: from concept to practice, Enterprise Information
Systems, 9 (2015) 186-209
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | A Review Paper on 'Chumbaki-Dravik Generator' |
| Country | : | India |
| Authors | : | Yogesh R. Shendage || Sushant V. Pampatwar |
Abstract:Day to day the demand of electricity is increasing a lot. To fulfill this demand and to eliminate disadvantages of traditional power generation technique many new techniques are being developed. Chumbakidravik generator is one among them. The Chumbaki-dravik generator technology provides attractive electricity generation idea. The chumbaki-dravik generator produces electricity without motion of any solid part. The chumbaki-dravik generator uses permanent magnets to produce electricity. The compactness of chumbakidravik generator makes it suitable for both large place applications for small place applications. In this paper discuss on Chumbaki-dravik generator technology including principle of operation, power extraction method is done. This technique is very useful to produce electricity with less cost.
Keywords -Chumbaki- dravik generator technology, compactness, permanent magnets, power extraction principle of operation
[1] Vineet Kumar Singh, Neha Singh Chauhan and Deepti Kushwaha, An overview of hydro-electric power plant. ISST Journal of
Mechanical Engineering, Vol. 6 No. 1, (January - June 2015), p.p. 59-62
[2] Sharad Sharma, Sangam Gambhir, Magnetic hydro dynamics power generation techniques. International Journal of Computing and
Corporate Research ISSN (Online) : 2249-054X Volume 5 Issue 5 September 2015
International Manuscript ID : 2249054XV5I5092015-11
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Review Paper |
| Title | : | Review On Application Of Lower Body Exoskeleton |
| Country | : | India |
| Authors | : | Prof. M. S. Agarwal || Kamble Swanand || Jadhav Abhijit || Kasar Mahesh |
Abstract:Aim of our project is Design and Development of Lower Body Exoskeleton i.e. chairless chair. It is simple in design and which can be easily worn like an exoskeleton, it consists of damper, spring, thigh strip, sole. The legs muscles are in rest position due to its weight transfer to the damper, sitting position is comfortably acquired. It keeps your back straight and can reduce the occurrence of bad postures for both healthy workers and those recovering from muscle related injuries. This exoskeleton based support would be useful to people whose current job requires them to stand for long hours. This new and modernized "chair" will ease the aches in the thighs and back.
Keywords - exoskeleton, damper, thigh strip.
[1] Cyril Varghese1, Vedaksha Joshi1, Vinayak Waghmare1, Ajal Nair1, Albey David1. "Design and Fabrication of Exoskeleton Based
Hydraulic Support".
[2] T. Yuvarajan Naidu, M. Sayaiq, M. Fikri, Ebrahim. M, M. Hariz. "Design and improvement of lower body exoskeleton".
[3] Baltej Singh Rupala, Ashish Singhala*, Gurvinder Singh Virkb."Lower Limb Exoskeleton: A Brief Review".
[4] Carmen Constantinescua,B,*,Paul Cristian Muresana,B, Gabreil-Marian Simona,B. "Jack Ex: the new digital manufacturing resource for
optimization of Exoskeleton based factory environments".
[5] Rafael R. Torrealba ∗, Samuel B. Udelman , Edgar D. Fonseca-Rojas. "Design of variable impedance actuator for knee joint of a
portable human gait rehabilitation exoskeleton".
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | A Review on Design of Plastic Injection Mould |
| Country | : | India |
| Authors | : | Yogesh S. Khairnar || Tejas U. Dhanepkar || Aniket D. Deshmukh || Akash V. Deore || Piyush R. Chhajed |
Abstract:Injection molding is one of the most preferred manufacturing process used by plastic industries due to its ability to easily manufacture complicated shapes. Plastic products nowadays are used everywhere from household utensils to industrial purpose because of its high strength with low weight characteristic and plastic products can be produced at low cost as per customer requirements. In injection mold design, several important factors are to be considered including material for mold, injection pressure, gate and runner location and size, type of mold, cooling channels,etc. This paper aims to provide an insight of literatures about recent research in design of injection mold for plastic molding.
Keywords - Mold Design, Injection molding Process, Plastic, Gate and Runner
[1] J.G.Kovacs,B.Siklo, Investigation of cooling effect at corners in injection molding, International Communications in Heat and Mass
Transfer 38 (2011) 1330-1334.
[2] Pankaj Shakkarwal and Lipin Yadav, Design and Mould flow analysis of injection mould for connecting link, International Journal
on Emerging Technologies 4(1): 182-185(2013).
[3] A.J. Giacomin, A.J. Hade, L.M. Johnson, A.W. Mix , Yi-Chang Chen , Hui-Chen Liao ,Shi-Chang Tseng, Core deflection in
injection molding, Journal of Non-Newtonian Fluid Mechanics 166 (2011) 908-914.
[4] Tong-Hong Wang, Wen-Bin Young, Study on residual stresses of thin-walled injection molding, European Polymer Journal 41
(2005) 2511-2517.
[5] Josef Gabor Kovacs,Ferenc Szabo,Norbert Krisztian Kovacs,Andras Suplicz,Bela Zink,Tamas =Tabi, HajnalkaHargitai, Thermal
simulation and measurement for rapid tool inserts in injection molding =applications, Applied Thermal Engineering 85 (2015) 44-
51.
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | A Detailed Review on Design and Development of Fixture for Knuckle Pin Drill Operation |
| Country | : | India |
| Authors | : | Atul Patil || Yogesh Dahiwal || Prashant Dighe || Tushar Bhosale || Siddharth Gham |
Abstract:Fixture is designed and developed to hold and support component to ensure that each is machined with accuracy. A fixture can be designed for particular job. Applicationsof Fixture is required in various industries according to their purpose. This can be achieved by selecting the location of fixturing elements such as locators and clamps. Fixture set up for component is done manually hence more cycle time required for loading and unloading material. So, there is need to develop the system which can help in improving productivity and time. Fixtures reduce the operation time and increases productivity and high quality of operation is achieved.............
Keywords - Fixture, accuracy, productivity, ANSYS, Clamps, Locators, Supports
[1] Design Of Fixture Of Connecting Rod For Boring Operation: Satyajeetsinh Raijada, Amit Dudhatra- 2014
[2] Modeling And Analysis Of Support Pin For Brake Spider Fixture By Fem Using Ansys Software: 1dr.Yadavalli Basavaraj, 2pavan
Kumar Bk-2013
[3] A Review On Design Of A Fixture For Rear Cover: Satyapal Vaghela Abhishek Singh-2006
[4] Design Analysis And Development Of Fixture For Hydraulic Lift Housing: Mr. Praful V. Bhendarkar 1, V H Banker-2014
[5] A Review And Analysis Of Current Computer-Aided Fixture Design Approaches Iain Boyle A,N, Yiming Rong A, David C Brown
B
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | Forming Of Complicated Shape by Using Viscous Pressure -A Review |
| Country | : | India |
| Authors | : | Chandrashekhar.P.Satav || Pranit.D.Bhopate || Ravikant.S.Khandait || Akshay.V.Bhosale || Mukesh.G.Chitupe |
Abstract:Viscous pressure forming (VPF) offers a multipurpose approach to low volume stamping of difficultto- form sheet metal alloys. The process imposes the use of a highly viscous pressurised medium as a forming tool. Compared with solid metal punch forming, the necking in the sheet metal can hold up in the VPF process. The viscosity of the viscous medium keeps constant in Viscous Pressure forming. In the VPF process using a viscous material can also be used in the Hydroforming process and offers the advantages of improved sealing to reduce leakage.The viscosity maintained most important role in the viscous pressure forming process..........
Keywords - Viscous pressure forming, sheet metal forming,viscosity, complicated shape,etc.
[1] Mustafa Ahmetoglu, Jiang Hua "Hydroforming of sheet metal using a viscous pressure medium"
[2] J. Liu, M. Ahmetoglu*, T. Altan "Evaluation of sheet metal formability, viscous pressure forming (VPF) dome test"
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | Review on Design and Development of Mist Cooling For Closed Room |
| Country | : | India |
| Authors | : | Pravin .B. Borade || Gyanba Pawar || Sourabh Patil || Kiran Pawar |
Abstract: However, it is difficult to quantitatively analyze temperature and humidity distribution in spray environment owed to uncertainty of outdoor environment. Based on the moist air theory combined with the heat and mass transfer model of droplets. This study established the year analytical model to analyze tea effect of spray cooling one tea environment temperature and humidity. The developed model can be used to calculate the temperature drop and humidity increase rates under different conditions. This study offers critical analysis of the environment parameters that influence the cooling effect and the cost of the cooling system spray.This paper provides a comparative study of the energy efficiency of a conventional ventilating and air-conditioning (VAC) system with three configurations.................
Keywords - climate change; energy efficiency; hot and dry climate; Chillers system; Electricity consumption
comfort assurance in office buildings Iona Sarbu, Marius Adam, Energy and Buildings 85 (2014) 45–58.
[2] Performance evaluation of misting fans in hot and humid climate N.H. Wong, Adrian Z.M. Chong, Building and Environment 45
(2010) 2666e2678.
[3] Study of mist-cooling for semi-enclosed spaces in Osaka, Japan. Craig Farnham, Masaki Nakaoa, Masatoshi Nishiokaa, Minako
Nabeshimaa Takeo Mizunob, Procedia Environmental Sciences 4 (2011) 228-238.
[4] Climatic influence on the design and operation of chillers systems serving office buildings in a subtropical climate.F.W.Yua, K.T.
Chanb, Rachel K.Y. Sit c, Energy and Buildings 55 (2012) 500–507.
[5] To examine the energy conservation potential of passive & hybrid downdraught evaporative cooling: A study for commercial
building sector in hot and dry climate of Ahmadabad Mansi Jayswala. Energy Procedia 30 ( 2012 ) 1131 – 1142.
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | Design and Analysis of Variable Message Sign Pole Structure |
| Country | : | India |
| Authors | : | n .R. Unecha || s .S. Jagtap || r .A.Ghatge || s .S. Manjare || s .M. Patil |
Abstract:This paper covers the geotechnical design of variable message sign pole (real time traffic warning sign pole). Traffic structures include sign bridges, cantilevered signs, signal supports, strain poles, illumination, and camera poles. The major cities in the world possess good modern road networks with huge everyday traffic similar to any developed countries like USA and Europe. Currently, these VMS display only general static information for testing their reliability under local conditions and to familiarize drivers with this technology. Local traffic authorities are currently addressing the blocking problem by planning a massive mass transport system of underground networks............
Keywords - VMS, Structure, ITS ,safety, strong.
[2] Guidelines_for_vms_on_state_highways.pdf.
[3] Introduction to Variable Message Sign Pole student handbook.
[4] Effectiveness of Variable Message Signs David Levinson Assistant Professor, Department of Civil Engineering, University of
Minnesota.
[5] Advanced Traffic Management System (ATMS) on NHS National Highways Authority of India G-5&6, Sector-10, Dwarka, New
Delhi - 110075 Highway Automation and Management Division Functional & Technical Specifications of ATMS Components /
Sub-Components.
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | Machine Jig for Assembly of Take-Up Wheel Shaft of Friction Type Currency Counting Machine |
| Country | : | India |
| Authors | : | Prof. A.J. Bankar || Amey Deepak Kulkarni || Shubham Navin Shinde || Girish Rajaram Tanavade || Ninad Milind Zende |
Abstract: It is the project report on Design and Development of Machine Jig for Assembly of Shaft used in Currency counting machine. This was asked by the industry NITIRAJ ENGINGEERS LTD. Who manufactures electronic weighing scale, electronic fare meter and currency counting machines to design and develop a machine that will be helpful for them to assemble a shaft use in friction type currency counting machine. The project report consist of the problem statement, fissile solutions, and best method adopted for the following. A good machine for the industry will increase the production rate for them and reduce human effort.
Issue 9, September-2013
[2] Design and Test of Pneumatic Systems for Production Automation Giorgio Figliolini and Pierluigi Rea LARM - Laboratory of
Robotics and Mechatronics DiMSAT, University of Cassino G. Di Biasio, 43 - 03043 Cassino, ITALY
[3] MODELING AND CONTROLLER DESIGN OF PNEUMATIC ACTUATOR SYSTEM WITH CONTROL VALVE W.K. Lai,
M.F. Rahmat and N. Abdul Wahab Department of Control and Instrumentation, Faculty of Electrical Engineering University
Teknologi Malaysia, 81310 Skudai, Malaysia.
[4] Force Control for a Pneumatic Cylinder Using Generalized Predictive Controller Approach. Hindawi Publishing Corporation
Mathematical Problems in Engineering Volume 2014, Article ID 261829.
[5] DIE DESIGNING AND MOLTEN METAL FLOW ANALYSIS FOR INTERMEDIATE FLANGE K Maheswari1 and G
Sureshkumar Faculty of Engineering, University Malaysia Sarawak (UNIMAS), Kota Samarahan 94300, Sarawak, Malaysia
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | Automatic Stack Feeding Machine |
| Country | : | India |
| Authors | : | Prof. S.D. Bhalekar || Vikas S. Vishwakarma || Arvind Umbarkar || Bhaskar M. Tale |
Abstract:Automation is one of the basic tool for improving the productivity. Automation in packaging of differenttypes of pouches, papers etc.inevitable and its demand increasing steadily in packaging industry. Automatic Stack feeder machine" which is based on the mechatronics principle and it include hopper, feed roller and conveyor. The feeder machine in automation industry used for dispense different types of items at high rate, reduces the time, increases the production rate and reduces the human effort.
Keywords - Productivity, Automation, Stack, Dispense, Packaging.
and Technology (IJETT) – Volume 26 Number 2- August 2015, ISSN: 2231-5381.
[2] A.O. Hannure, Literature Review on Automatic Seed Feeder, International Journal of Engineering Trends and Technology (IJETT)
– Volume 36 Number 7- June 2016
[3] Henry Verheke, Pouch vending machine, United States Patent 3,613,947, Nov 19 ,1971
[4] John M. Browne, Vertical vacuum corrugation feeder, United States Patent 5,249,787, Aug. 25, 1987.
[5] Edward M. Iftovits, Modular document feeder device, United States Patent 4,688,782, Oct. 5, 1993.
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | A Review on Design and Development of Pick and Place Robotic Arm |
| Country | : | India |
| Authors | : | Prof. S.D Rajgure || Aakash D Chougale || Ajit N Bhatkande || Suraj A Bhamare || Swaroop S Chougale |
Abstract: Modeling of pneumatic robotic arm for automation in two machines, for material handling purpose. Automation is to be done between two machines namely extrusion and belt grinding machine. This is made as per forward and inverse kinematics of robot arm motion. It is necessary to calculate the load carried by arm during its work time. It is commanded to design the pneumatic arm to pick and place the cylindrical object like steel bars. There are so many types of robotic arms works on various power source like pneumatic system, hydraulic system, Servo motor and includes many of basic mechanisms which are costlier for designing a pneumatic arm it requires number of cylinder and pistons and its motion is achieved by using compressed air supply.................
Keywords - Forward and Inverse Kinematics, Gripping, Modeling, Pick and Place Arm, Pneumatic System
[2] Design and Implementation of Pick and Place Robotic Arm", Ravikumar Mourya, Amit Shelke, Saurabh Satpute.
[3] Design and Fabrication of Pneumatic Robotic Arm", Prof. S. N. Teli, Akshay Bhalerao, Sagar Ingole.
[4] Design and Implementation of Multi Handling Pick and Place Robotic Arm", S. Premkumar, K. Surya Varman, R. Balamurugan.
[5] Design and Manufacturing of a Prototype of a Light Weight Robot Arm", S. C. Gutierrez, R. Zotovic, M. D. Navarro.
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | Prosthesis For Dogs With Back Limb Deformities/Amputation |
| Country | : | India |
| Authors | : | Y.B Shendge || Santosh Kumar Yadav || Akshay T Jagtap || Nikhil P Sawant || Shrishail M Swami |
Abstract:Prosthesis is an artificial device that replaces a missing body part, which may be lost through trauma, disease or congenital condition. Prosthetics are intended to restore the normal function of the missing body part. The current canine prosthesis market is catered towards dogs with amputations and is very expensive because of the small number of products available. Due to the variations in limb deformities, there is yet to be a customizable solution. Most of the products available are targeted towards the walking aid but there are only few products which are focused towards rehabilitation and and recovery. There is a need to design a simple products which can be a comfortable walking aid as well as a good recovery aid. There are good chances that a dog will be healed in a case of paralysis so the walking aid should have the facility to help him recover fast.
Keywords - Prosthetic, Paralysis, Canine, Cart, Amputation
Patent 3,215,117 Nov. 2, 1965
[2]. Lincoln J. Parkes, 532 Newtown Rd., Berwyn, Pa. 193124,375,203 Mar. 1, 1983
[3]. Arnold P. Costell , 6515 1/2 Vista DelMar , Playa Del Rey, Patent No; US 6,729,268 B1 Date of Patent: May 4, 2004
[4]. Richard W. Hill; Robert D. Hill, bothof 1 Portland Drive, Forsbrook, Stoke-on-Trent, ST ll 9AU, United Kingdom Patent
Number: 5,224,444 Date of Patent:Jul. 6, 1993
[5]. Dana J. C00], 261 W. Monroe St. #3,Little Falls, NY (Us) 13365 Patent N0.: US 6,640,751 B1 Date of Patent: Nov. 4, 2003
[6]Lincoln J. Parkes, 309 S. Morris St.,Oxford' MD (Us) 21654 Patent N0.2 US 6,820,572 B1, Nov. 23, 2004
- Citation
- Abstract
- Reference
- Full PDF
| Paper Type | : | Research Paper |
| Title | : | Design, Optimization And FE Analysis of Composite Mono Leaf Spring |
| Country | : | India |
| Authors | : | A.K.Tarange || Prof. M. B. Bankar || Dr. A. M. Badadhe |
Abstract: Leaf springs are mainly used in suspension systems to absorb shock loads in automobiles like light motor vehicles, heavy duty trucks and in rail systems. It carries lateral loads, brake torque, driving torque in addition to shock absorbing. The study of composite leaf springs has been popular in automotive light weighting. Particularly, the research on the fatigue reliability of composite leaf springs is crucial. Weight reduction is now the main issue in automobile industries. In the present work, the dimensions of an existing mono steel leaf spring of a Maruti Alto 800 passenger vehicle is taken for modeling and analysis of modeling and analysis of a laminated composite mono leaf spring with glass fiber composite material.
Keywords - Composite Mono Leaf Spring, Design, Optimization, FEA.
Vienna .
[2]. Chen Qian,[2] Wenku Shi, Zhiyong Chen, Shixiang Yang, Qianqian Song," Fatigue Reliability Design of Composite Leaf Springs
Based on Ply Scheme Optimization", State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun
130022, China.
[3]. Mahmood M. Shokrieh[3], Davood Rezaei," Analysis and optimization of a composite leaf spring", Elsevier Science (2003) 317–
325.
[4]. I. Rajendran,[4] S. Vijayarangan," Optimal design of a composite leaf spring using genetic algorithms", Elsevier Science Ltd.
79(2001) 1121-1129 .
[5]. H.A. Al-Qureshi [5]," Automobile leaf springs from composite materials ", Journal of Materials Processing Technology 118 (2001)
58-61.