Abstract: This research investigates the vibration behavior of a CNC Plasma Cutting machine as part of a predictive maintenance approach. The study focuses on the influence of three process parameters: pressure, current, and cutting speed, with vibration RMS and acceleration (a(g)) as the measured responses. Vibration data were collected using a Vibration Analyzer and Bearing Defender. The results were analyzed through descriptive statistics, 3D surface plots, and multi-response optimization using the desirability function method. Findings indicate that pressure........
Key Word: CNC Plasma Cutting, Vibration Analysis, RMS, Acceleration, Desirability Function, Predictive Maintenance.
[1]. Çelik YH. Investigating The Effects Of Cutting Parameters On Materials Cut In CNC Plasma. Mater Manuf Process. 2013;28(10):1053–60.
[2]. Tuladhar U, Ahn SH, Jeong GH, Bae J, Kim S, Kang J, Et Al. Numerical Analysis And Schlieren Visualization Of Gas Flow Dynamics Inside The Plasma Arc Cut Kerf With Curved Cutting Fronts. Int Commun Heat Mass Transf [Internet]. 2024;159(PA):108075. Available From: Https://Doi.Org/10.1016/J.Icheatmasstransfer.2024.108075
[3]. Matouk Z, Rincón R, Torriss B, Mirzaei A, Margot J, Dorris A, Et Al. Functionalization Of Cellulose Nanocrystal Powder By Non-Thermal Atmospheric-Pressure Plasmas. Cellulose. 2021;28(10):6239–52.
[4]. M Erbilen, O Çakır. Effects Of Process Parameters In Plasma Arc Cutting On Stainless Steels And Structural Steel. 2019;25(1):23–.